Energy Efficiency rebates
Tipmont REMC’s rebate program in partnership with PowerMoves from Wabash Valley Power is designed to encourage members to purchase energy efficient appliances aimed at helping you save energy and lower your electric bill.
Tipmont rebates
Tipmont will verify the purchase, installation, and energy efficiency rating of the equipment. Installation or inspection of a load management switch is required to qualify. After all requirements are met, Tipmont REMC will provide the rebate as a one-time credit on your electric account.
Aquanta Smart Water Heater Controller
Nest Thermostat
Electric Water Heater
$50
50-80 GALLON ELECTRIC WATER HEATER
$100
80+ GALLON ELECTRIC WATER HEATER
CONDITIONS
- Purchase and install an energy efficient electric water heater
- Uniform Energy Factor rating must be at least .92
- Provide valid proof of purchase and proof of energy efficiency rating within 60 days of purchase
- Submit a completed rebate form
- Allow Tipmont REMC to install or inspect a demand response switch on the water heater
PowerMoves rebates
In addition to the Tipmont REMC rebates, members are also eligible for rebates through Wabash Valley Power Association's PowerMoves program. Please visit PowerMoves.com or call (800) 833-2279 for more information.
Air Source Heat Pump - Split System (with Electric Backup)
$750
REPLACING ELECTRIC RESISTANCE: electric furnace, ceiling cable, baseboard
$750
REPLACING FOSSIL FUEL: propane or fuel oil
$250
REPLACING EXISTING AIR SOURCE HEAT PUMP
Conditions
- ≥ 16 SEER
- ≥ 9.0 HSPF
- Electric back up only
- Condenser and coil must be replaced and installed as a matched set
- New system must heat and cool entire home
Application
Dual Fuel Heat Pump Rebate
$500
REPLACING ELECTRIC RESISTANCE:
electric furnace, ceiling cable, baseboard
$500
REPLACING FOSSIL FUEL AND CENTRAL AIR CONDITIONING
Conditions
- ≥ 16 SEER
- ≥ 9 HSPF
- ≥ 90 ≥ AFUE
- Condenser and coil must be replaced and installed as a matched set.
- New system must heat and cool entire home.
Application
Ground Source (Geothermal) Heat Pump
$1,500
CLOSED LOOP, REPLACING:
electric resistance, fossil fuel, or into new construction
$1,500
OPEN LOOP, REPLACING:
electric resistance, fossil fuel, or into new construction
Conditions
- Closed loop ≥ 19 EER / ≥ 4 COP
- Open loop ≥ 23 EER / ≥ 4.5 COP
- Condenser and coil must be replaced and installed as a matched set
Application
Heat Pump Water Heater
$400
Replacing electric resistance tank$400
New ConstructionConditions
- Minimum EF of 2.0
Variable Speed Pool Pump
$250
Replacing existing single stage pool pump
Conditions
- ENERGY STAR ®
Application
Commercial & Industrial (C&I) Rebates
A number of C&I Rebates are available through PowerMoves, a partnership with Wabash Valley Power.