Buying a new home?
Make sure it’s up to snuffTipmont REMC | Wednesday, March 24, 2021
Your friends at Tipmont Wintek want to be sure that if you are buying a new home you don’t overlook the hidden system of wires that surrounds you in the home.
During an inspection, the electrical professional will:
- Make sure all the electrical components are working safely.
- Identify any problem areas/wiring mistakes or problems associated with older wiring.
- Identify any fire or safety hazards. These include frayed, exposed or damaged wires as well as inside and outside receptacles that are not protected with arc- or ground-fault circuit interrupters and tamper-resistant outlet electrical receptacles.
- Help you meet insurance risk assessment inspection requirements.
Once you have moved into your new home, there’s still some “homework” to do.
- Make sure all circuits in the service panel are labeled correctly for the rooms or major appliance they serve.
- Make sure adults and teenagers in the home familiarize themselves with the service panel and know how to work the circuit breakers or replace fuses.
- Make sure everyone knows which is the master power switch. While you’re at it, make sure everyone knows the locations of the main shut-off valves for the water and gas lines and how to work those, too.
- Make sure the lightbulbs you’re using are the correct wattage for the fixtures. If the wattage is higher than recommended, the wiring in the fixture may be damaged from the excessive heat.
TAMPER-RESISTANT ELECTRICAL RECEPTACLES REQUIRED
Each year, approximately 2,400 children suffer severe shock and burns when they stick items into the slots of electrical receptacles. If you are moving into a newly constructed home, especially if you have children, make sure electricians installed these receptacles.
TRRs have spring-loaded shutters that close off the contact openings, or slots, of the receptacles. When a plug is inserted into the receptacle, both springs are compressed and the shutters then open, allowing for the metal prongs to make contact to create an electrical circuit. Because both springs must be compressed at the same time, the shutters do not open when a child attempts to insert an object into only one contact opening, and there is no contact with electricity.
Tamper-resistant receptacles are an important next step to making the home a safer place for children.
Source: National Electrical Code
If you’re looking at purchasing an older home, an inspection by a licensed electrical inspector will determine if the home has working ground-fault circuit interrupters (GFCI) installed properly. If it doesn’t, ask the seller to have them installed or compensate in price.
Some sellers or home inspectors may dismiss the value of GFCIs, but the Electrical Safety Foundation International says thousands of lives have been saved by them since their introduction into the National Electrical Code (NEC) in the 1970s. GFCIs can greatly reduce the risk of shock by immediately shutting off an electrical circuit when that circuit detects a shock hazard.
GFCIs can be installed in a circuit breaker panelboard or directly in a receptacle outlet.
GFCI protection is required by the 2017 NEC for newly installed and replacement 15- and 20-amp receptacles on kitchen countertops; in bathrooms, outdoor areas, unfinished basements and crawl spaces, garages, boathouses, and laundry areas; and within 6 feet of sinks, bathtubs and shower stalls.
- All GFCIs, whether circuit-type or breaker-type, should be installed by a qualified electrician.
- Test GFCIs after installation and once a month thereafter to make sure they are working properly.
- Replace defective GFCIs immediately. A defective device may create a false sense of security to those who do not know that it is non-functional.
Source: ESFI, NEC
- Last modified: Monday, March 29, 2021